#!/bin/sh

. /usr/share/debconf/confmodule
set -e

restore_old_timeouts()
{
    if [ -s /run/open-iscsi/upgrade/restore_old_timeouts ] ; then
        sh /run/open-iscsi/upgrade/restore_old_timeouts || :
    fi
    rm -f /run/open-iscsi/upgrade/restore_old_timeouts
    [ ! -d /run/open-iscsi/upgrade ] || rmdir --ignore-fail-on-non-empty /run/open-iscsi/upgrade
    [ ! -d /run/open-iscsi ] || rmdir --ignore-fail-on-non-empty /run/open-iscsi
}

case "$1" in
    configure)
        # We switched over to modules-load.d logic, so we have to take
        # care of this in postinst now.
        MODULES_FILE=/lib/modules-load.d/open-iscsi.conf
        if [ -f /etc/modules-load.d/open-iscsi.conf ] ; then
            MODULES_FILE=/etc/modules-load.d/open-iscsi.conf
        fi
        grep '^[^#]' $MODULES_FILE | while read module args ; do
            [ "$module" ] || continue
            modprobe $module $args >/dev/null 2>&1 || true
        done

	# Move old configuration from /etc/ into /etc/iscsi/
	# But only if configuration in /etc/iscsi is untouched
	# (FIXME: should this be removed? this is ancient and was
	# already in Squeeze's postinst - and we don't really need to
	# support direct upgrades from Lenny (5) to Stretch (9).)
	
        if [ -f /etc/initiatorname.iscsi ] ; then
            if grep -q "^GenerateName=yes" /etc/iscsi/initiatorname.iscsi ; then
                mv /etc/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
		chmod 600 /etc/iscsi/initiatorname.iscsi
	    fi
	fi

	if dpkg --compare-versions "$2" le-nl "2.0.873+git0.3b4b4500-12" ; then
	    # Handle the fact that /etc/iscsi/initiatorname.iscsi is no longer
	    # a conffile of this package but we want to keep it.
	    if [ -f /etc/iscsi/initiatorname.iscsi.dpkg-backup ] && ! [ -f /etc/iscsi/initiatorname.iscsi ] ; then
		mv -f /etc/iscsi/initiatorname.iscsi.dpkg-backup /etc/iscsi/initiatorname.iscsi
	    fi
	fi

	# Compatibility symlinks
	for file in iscsid iscsi_discovery iscsi-iname iscsistart; do
		if [ ! -e /usr/sbin/$file ]; then
			ln -s /sbin/$file /usr/sbin/$file
		fi
	done

	# Obsolete: only open-iscsi 1.0, never even shipped with any
	# stable Debian release. But postinst up to Jessie still
	# created this directory, so keep this until at least Stretch.
	if [ -d /var/lib/open-iscsi ]; then
		rmdir --ignore-fail-on-non-empty /var/lib/open-iscsi
	fi

        # generate a unique iSCSI InitiatorName
        NAMEFILE=/etc/iscsi/initiatorname.iscsi
        if [ ! -e $NAMEFILE ] && [ -z "$2" ] ; then
            # Generate a unique InitiatorName and save it
            INAME=$(iscsi-iname -p iqn.1993-08.org.debian:01)
            if [ -n "$INAME" ] ; then
                echo "## DO NOT EDIT OR REMOVE THIS FILE!" > $NAMEFILE
                echo "## If you remove this file, the iSCSI daemon will not start." >> $NAMEFILE
                echo "## If you change the InitiatorName, existing access control lists" >> $NAMEFILE
                echo "## may reject this initiator.  The InitiatorName must be unique">> $NAMEFILE
                echo "## for each iSCSI initiator.  Do NOT duplicate iSCSI InitiatorNames." >> $NAMEFILE
                printf "InitiatorName=%s\n" "$INAME" >> $NAMEFILE
                chmod 600 $NAMEFILE
            else
                echo "Error: failed to generate an iSCSI InitiatorName, driver cannot start."
                echo
                exit 1;
            fi
        fi
    ;;

    abort-upgrade|abort-remove|abort-deconfigure)
    ;;

    *)
        echo "postinst called with unknown argument \`$1'" >&2
        exit 1
    ;;
esac

# Automatically added by dh_systemd_enable
# This will only remove masks created by d-s-h on package removal.
deb-systemd-helper unmask iscsid.service >/dev/null || true

# was-enabled defaults to true, so new installations run enable.
if deb-systemd-helper --quiet was-enabled iscsid.service; then
	# Enables the unit on first installation, creates new
	# symlinks on upgrades if the unit file has changed.
	deb-systemd-helper enable iscsid.service >/dev/null || true
else
	# Update the statefile to add new symlinks (if any), which need to be
	# cleaned up on purge. Also remove old symlinks.
	deb-systemd-helper update-state iscsid.service >/dev/null || true
fi
# End automatically added section
# Automatically added by dh_systemd_enable
# This will only remove masks created by d-s-h on package removal.
deb-systemd-helper unmask iscsid.service >/dev/null || true

# was-enabled defaults to true, so new installations run enable.
if deb-systemd-helper --quiet was-enabled iscsid.service; then
	# Enables the unit on first installation, creates new
	# symlinks on upgrades if the unit file has changed.
	deb-systemd-helper enable iscsid.service >/dev/null || true
else
	# Update the statefile to add new symlinks (if any), which need to be
	# cleaned up on purge. Also remove old symlinks.
	deb-systemd-helper update-state iscsid.service >/dev/null || true
fi
# End automatically added section
# Automatically added by dh_systemd_enable
# This will only remove masks created by d-s-h on package removal.
deb-systemd-helper unmask open-iscsi.service >/dev/null || true

# was-enabled defaults to true, so new installations run enable.
if deb-systemd-helper --quiet was-enabled open-iscsi.service; then
	# Enables the unit on first installation, creates new
	# symlinks on upgrades if the unit file has changed.
	deb-systemd-helper enable open-iscsi.service >/dev/null || true
else
	# Update the statefile to add new symlinks (if any), which need to be
	# cleaned up on purge. Also remove old symlinks.
	deb-systemd-helper update-state open-iscsi.service >/dev/null || true
fi
# End automatically added section
# Automatically added by dh_installinit
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ]; then
	if [ -x "/etc/init.d/iscsid" ]; then
		update-rc.d iscsid defaults >/dev/null || exit $?
	fi
fi
# End automatically added section
# Automatically added by dh_installinit
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ]; then
	if [ -x "/etc/init.d/open-iscsi" ]; then
		update-rc.d open-iscsi defaults >/dev/null || exit $?
	fi
fi
# End automatically added section
# Automatically added by dh_installdeb
dpkg-maintscript-helper rm_conffile /etc/init.d/umountiscsi.sh 2.0.873+git0.3b4b4500-9 -- "$@"
# End automatically added section
# Automatically added by dh_installdeb
dpkg-maintscript-helper rm_conffile /etc/init/iscsi-network-interface.conf 2.0.873-3ubuntu12~ -- "$@"
# End automatically added section


if [ "$1" = configure ] ; then
    # There already is a check in preinst with a debconf prompt that
    # allows the administrator to abort. Don't abort here, because
    # leaving the package in a half-configured state is probably worse.
    # Just make sure to wait a while to see if recovery happens. If
    # not, proceed anyway.
    RETRIES=0
    while cat /sys/class/iscsi_session/session*/state 2>/dev/null | grep -qv LOGGED_IN ; do
        if [ $RETRIES -eq 0 ] ; then
            echo "open-iscsi postinst: since the check in preinst some iSCSI sessions have" >&2
            echo "                     failed. -> will wait 30s for automatic recovery" >&2
        fi
        if [ $RETRIES -gt 30 ]; then
            echo "open-iscsi postinst: some sessions are still in failed state -> iscsid" >&2
            echo "                     will be restarted regardless, since that may" >&2
            echo "                     actually help with the session recovery." >&2
            break
        fi
        RETRIES=$((RETRIES + 1))
        sleep 1
    done

    # Before we restart iscsid, we should increase the recovery timeout
    # significantly. Thanks to Mike Christie (open-iscsi upstream) for
    # the suggestion. But store the old timeouts and restore them
    # later.
    new_timeout=120
    mkdir -m 0700 -p /run/open-iscsi/upgrade
    rm -f /run/open-iscsi/upgrade/restore_old_timeouts
    trap restore_old_timeouts EXIT
    for settingfile in /sys/class/iscsi_session/session*/recovery_tmo ; do
        [ -f "${settingfile}" ] || continue
        setting="$(cat "$settingfile" 2>/dev/null || :)"
        if [ -n "$setting" ] ; then
            echo "echo "'"'"${setting}"'"'" > "'"'"${settingfile}"'" 2>/dev/null' >> /run/open-iscsi/upgrade/restore_old_timeouts
        fi
        if [ ${new_timeout} -gt ${setting} ] ; then
            echo ${new_timeout} > "${settingfile}" 2>/dev/null
        fi
    done

    # Just in case something goes wrong:
    sync

    # We are upgrading from a pre-Stretch version of open-iscsi. There,
    # we only had an open-iscsi init script. Since we now have iscsid
    # for the daemon (which is and should be restarted on upgrades) and
    # open-iscsi for logging in to the targets (which shouldn't be
    # touched on upgrades, especially not restarted, because we don't
    # want the storage stack to suddenly disappear on package
    # installation!), we have to manually take care of this.
    #
    # Notes:
    #   - kill iscsid directly, don't use the old stop script, since
    #     we don't want to sever any connection. Can't use the new
    #     stop script, because systemd tracks service status. Note
    #     that services from init scripts have RemainAfterExit=yes, so
    #     manually killing it is OK with systemd and the open-iscsi
    #     service will still be considered to be started.
    #   - use PIDFILE, not killall, since support for namespacing iSCSI
    #     might come to the kernel soon (maybe 4.2?). Since that will
    #     require no userspace change, people might run Jessie with a
    #     backported kernel that supports this, and we REALLY don't
    #     want to kill iscsid in containers (LXC, nspawn, ...)
    #
    # For safety, this upgrade path should be kept until at least
    # Buster.
    if dpkg --compare-versions "$2" le-nl "2.0.873+git0.3b4b4500-9"; then
        # We need to query invoke-rc.d here to comply with Debian's
        # policy, so we check if the old stop script would have been
        # executed.
        set +e
        invoke-rc.d --query open-iscsi stop
        POLICY_RC=$?
        set -e
        # invoke-rc.d will return 105 if there is no policy-rc.d.
        # Also, even if there is a policy-rc.d and that returns 105
        # ('undefined behavior'), invoke-rc.d will assume that it may
        # in fact execute the action. Therefore, we will treat exit
        # code 105 the same as exit code 104 here.
        if [ $POLICY_RC -eq 104 ] || [ $POLICY_RC -eq 105 ] ; then
            PIDFILE=/var/run/iscsid.pid
            if ! start-stop-daemon --oknodo --stop --quiet \
                                   --pidfile "$PIDFILE" \
                                   --name iscsid --signal TERM \
                                   --retry 30 ; then
                # Check if it's still running, as error exit by
                # start-stop-daemon might not be an actual error.
                if [ -s $PIDFILE ] && kill -0 `sed -n 1p $PIDFILE` >/dev/null 2>/dev/null ; then
                    echo "ERROR: Could not terminate old iscsid on upgrade, your system is most" >&2
                    echo "likely hung. Don't know what to do, sorry! Aborting." >&2
                    exit 1
                fi
            fi
            rm -f $PIDFILE
            unset PIDFILE
        fi

        # Note: 3>&- is required because iscsid doesn't close unused
        #       FDs, but debconf/confmodule will make the fd 3 point to
        #       the original stdout (and stdout to stderr) to make sure
        #       no program accidentally issues a command on stdout. On
        #       sysvinit systems this combination (iscsid not closing
        #       fds, fd 3 remaining open) will cause dpkg to wait
        #       forever for the maintscript to finish. (iscsid keeps
        #       this end of the pipe open even though the maintscript
        #       is finished, so dpkg will never receive a POLLHUP on
        #       its end of the pipe, waiting forever.) Closing fd 3
        #       here is the simplest solution. This issue does not
        #       occur with other init systems, since they start
        #       services in a clean environment without any extraneous
        #       open fds.
        invoke-rc.d iscsid start 3>&-
    else
        if [ -n "$2" ]; then
            invoke-rc.d iscsid restart 3>&-
        else
            invoke-rc.d iscsid start 3>&-
        fi
    fi

    RETRIES=0
    while cat /sys/class/iscsi_session/session*/state 2>/dev/null | grep -qv LOGGED_IN ; do
        if [ $RETRIES -eq 0 ]; then
            echo "open-iscsi postinst: after iscsid restart, waiting for iSCSI sessions" >&2
            echo "                     to recover. This may take a couple of seconds." >&2
        fi

        if [ $RETRIES -gt ${new_timeout} ]; then
            db_reset open-iscsi/upgrade_recovery_error || true
            db_input critical open-iscsi/upgrade_recovery_error || true
            db_go
            break
        fi

        RETRIES=$((RETRIES + 1))
        sleep 1
    done

    restore_old_timeouts
    trap - EXIT

    # Don't restart (and therefore stop) open-iscsi, because we don't
    # want to logout from targets during a simple upgrade. But also,
    # if for some reason there's some misconfigured target in the
    # config that couldn't be activated, don't break postinst, so
    # ignore the exit code.
    # See above for why 3>&- is here. (Technically it's not required
    # for postinst to work, but vgchange likes to complain about leaked
    # file descriptors, and we don't need to show that message to the
    # user.)
    invoke-rc.d open-iscsi start 3>&- || true
fi

exit 0